Tagline website - untuk edit di: Admin - General Setting - Template - Pengaturan Text



Customer Service

SMS / Hotline
031 - 58201269 / 085755451067 surabaya shop
022 - 20450060 / 08156085524 bandung shop
08121314327 / 085888432100 jakarta shop
Keranjang Belanja
Keranjang belanja Anda masih kosong. Selamat berbelanja.

Rekening Pembayaran
Testimonial

Tria
"Respon dan pelayanan dari Customer Sevice yang Online cepat, dan barangnya sampai ditangan saya tepat waktu. Terimakasih..."


914466  large
GY-MAX4466 Electret Microphone Amplifier MAX4466 with Adjustable Gain
Code : 147
Deskripsi :
Deskripsi Produk

Product Description
Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use the Maxim MAX4466, an op-amp specifically designed for this delicate task! The amplifier has excellent power supply noise rejection, so this amplifier sounds really good and isn't nearly as noisy or scratchy as other mic amp breakouts we've tried!

This breakout is best used for projects such as voice changers, audio recording/sampling, and audio-reactive projects that use FFT. On the back, we a small trimmer pot to adjust the gain. You can set the gain from 25x to 125x. That's down to be about 200mVpp (for normal speaking volume about 6" away) which is good for attaching to something that expects 'line level' input without clipping, or up to about 1Vpp, ideal for reading from a microcontroller ADC. The output is rail-to-rail so if the sounds gets loud, the output can go up to 5Vpp!

Using it is simple: connect GND to ground, VCC to 2.4-5VDC. For the best performance, use the "quietest" supply available (on an Ard uino, this would be the 3.3V supply). The audio waveform will come out of the OUT pin. The output will have a DC bias of VCC/2 so when its perfectly quiet, the voltage will be a steady VCC/2 volts (it is DC coupled). If the audio equipment you're using s AC coupled audio, place a 100uF capacitor between the output pin and the input of your device. If you're connecting to an audio amplifier that has differential inputs or s decoupling capacitors, the 100uF cap is not d.

The output pin is not designed to drive speakers or anything but the smallest in-ear headphones - you'll need an audio amplifier (such as our 3.7W stereo amp) if you want to connect the amp directly to speakers. If you're connecting to a microcontroller pin, you don't need an amplifier or decoupling cap

Harga
Rp 80.000,-

Jumlah :


 




Ada pertanyaan tentang produk?
Hubungi :
031 - 58201269 / 085755451067 surabaya shop
022 - 20450060 / 08156085524 bandung shop
08121314327 / 085888432100 jakarta shop

Hubungi via YM